联系我们
NEWTRENDMEGA INDUSTRY LIMITED
NO 1902, 6/F., Easey Comm Building,
NOS 253-261 Hennessy Road,
Wanchai, Hongkong
Telephone: 00852 2811 3620
Telefax: 00852 2811 3621
产品展示
机械式蠕变测试仪
The measurement of creep behavior provides data for design purposes as well as for research and development. The test is performed on standardized test specimens under specified conditions, such as pretreatment, temperature and humidity. DIN EN ISO 899 or ASTM D 2990 describe the creep test on plastics for the tensile test and the flexure test. Dead load / lever systems are characterized by simplicity and are suitable for true long-term measurements. With a movable camera system, cost-effective multi-station systems can be created.
Features
Cost-effective multi station systems possible
Test Load up to 500 N
Movable Camera System (optional)
Specification
|
Maximum Test Load |
500 N / 5 kN |
|
Load Application |
Dead Load/ Lever 10:1 |
|
Travel |
100 mm |
|
Travel Measurement Resolution |
Optional |
|
Force Measurment Resolution |
Optional |
|
Temperature Control |
Optional |
|
Temperature Consistency |
Optional |
|
Dimensions (D x W x H) |
800 x 1040-1820 mm x 2100 mm |
|
Weight |
Depending on configuration |
|
Mains |
Depending on configuration |